HP PAVILION Pavilion DV8300 Maintenance And Service Manual page 161

✎
If necessary, perform the following steps to remove the power
connector cable from the fan/heat sink assembly.
The power connector cable is included in the Miscellaneous
Cable Kit, spare part number 403814-001.
7. Turn the fan/heat sink assembly upside down with the power
connector toward you.
8. Remove the power connector cable 1 from the routing
channel on the fan/heat sink assembly.
9. Remove the power connector 2 from the clip in the fan/heat
sink assembly.
Removing the Power Connector Cable
Reverse the above procedure to install the fan/heat sink assembly.
Maintenance and Service Guide
Removal and Replacement Procedures
5–69