Taking A Reading - Omron M6 Instruction Manual

3. Using the Unit

3.3 Taking a Reading

Notes:
• To cancel a measurement, press the O/I START button to turn the unit off and to release the air in the arm cuff.
• Remain still while taking a measurement.
1.
Press the O/I START button.
The cuff will start to inflate automatically.
START
Dual
Check
System
8
INFLATE DEFLATE
Cuff Wrapping Guide
END COMPLETE
If your systolic pressure is
more than 220 mmHg
After the cuff starts to inflate, press and hold
the O/I START button until the monitor
inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
• Do not apply more pressure than necessary.