Maintenance And Storage; Technical Data - Omron M4-I Instruction Manual

Fully automatic blood pressure monitor
Table of Contents

Advertisement

M4-I
Maintenance and
storage
10
• For cleaning the monitor only use a soft, lightly moi-
stened cloth.
Do not use petroleum spirits, thinners or similar
solvents!
• Stains on the cuff can be carefully removed using a
moist cloth and soapy water.
Do not wash the cuff or make it wet!
• Keep your blood pressure monitor in the storage
case to protect it from dust and moisture.
• Protect your monitor against vibrations and do not
leave it in a place where temperatures are extreme-
ly low (below -20 °C) or extremely high (above
60 °C) or with high humidity(+ 85%).
• Do not use your monitor at very low temperatures
(below 10 °C) or very high temperatures (above
40 °C).
• Do not fold the cuff or air tube together too tightly
and do not crease them.
• Do not carry out repairs of any kind yourself.
If a defect occurs, consult the OMRON Customer
Service or seek the advice of your surgical applian-
ce stockist or pharmacist.
• The well confirmed accuracy of this blood
pressure monitor is designed to last a long time.
• In order to increase the lifetime of the batteries
take them out when you store the device for a
longer period than 2 months.
• Electro-magnetic fields can influence the mea-
surement. Do not use a potable phone near this
unit.

Technical data

Model:
Display:
Blood Pressure
Measurement Range:
Accuracy:
Memory:
Inflation:
Deflation:
Pressure Detection:
Measurement Method:
Power Source:
Battery Life:
Operating Temperature:
Storage Temperature:
Humidity:
Storage humidity:
Console Weight:
Outer Dimensions:
Cuff Dimensions:
Accessories:
NOTE: Subject to technical modification without prior notice
• Disposal of this product and used batteries should be carried out in accordance
with the national regulations for the disposal of electronic products.
= Type B
English
This device fulfils the provisions of the EC directive
93/42/EEC (Medical Device Directive). This blood
pressure monitor is designed according to the
European standard EN1060, Non-invasive sphyg-
momanometers Part 1: General requirements and
Part 3: Supplementary requirements for electrome-
chanical blood pressure measuring systems.
OMRON M4-I
LCD digital display
Pressure: 0 mm Hg to 280 mm Hg
Pulse: 40 – 180/min.
Pressure: ±3 mm Hg
Pulse: ±5% of reading
14 measurements
Fuzzy-Logic controlled by electric pump
Automatic pressure release valve
Capacitive pressure sensor
Oscillometric method
4 Alkaline batteries 1.5V (Type LR6)
or AC/DC adapter (optional, 6V = 4W)
Capacity of new batteries is approx.
300 measurements
10°C to 40°C
-20°C to 60°C
30 to 85% RH
10 to 95% RH
Approximately 450g with batteries
Approximately 167.5 mm x 65 mm x 106 mm
Approximately 140 mm x 480 mm
( arm circumference 22 – 32 cm )
Cuff, Type M (CR17); instruction manual,
storage case, battery set
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents