To Change Video Memory Settings Using Bios Setup Utility - HP Pavilion CRVSA-02T1-75 Reference Manual

Setting
Hard Drive
+Removable Devices
CD-ROM Drive
Built-in LAN
Setting
Save Changes and Exit
Discard Changes
and Exit
Get Default Values

To change video memory settings using BIOS Setup utility

The notebook comes with either 32MB or 16MB of video memory.
Note
Changing your video memory to 8MB, 16MB, 32MB, or 64MB may change the
performance of your notebook, depending on your selection.
To change your video memory:
1. Select Start > Turn Off Computer > Restart.
2. Press F2 when the splash screen appears.
3. Move the down arrow key until UMA Video Memory is highlighted. Press
4. Press F10 to save configuration changes and exit BIOS screen.
Boot Menu
Description
Shows the order of boot devices. Move the entries to
change the order. If the notebook has more than one
device in a + category, you can select the one
scanned. Built-in LAN provides diskless boot from a
network server.
Exit Menu
Description
Saves Setup changes, then exits and reboots.
Discards any Setup changes made since last save,
then exits and reboots. Does not affect password, date,
or time changes.
Restores default settings, and remains in Setup. Does
not affect password, date, or time changes.
Enter to bring up a list of memory settings. Selections include 8 MB, 16MB,
64MB, or Auto.
Troubleshooting and Maintenance
Configuring Your Notebook
Default
1. Hard Drive
2. Removable
Devices
3. CD-ROM Drive
4. Built-in LAN
Default
Reference Guide 87