Download Print this page

HP Mini 700 Maintenance And Service Manual: Navigating And Selecting In The Setup Utility; Displaying System Information; Restoring Default Settings In The Setup Utility

Hewlett-packard netbook maintenance and service guide.
Hide thumbs

Advertisement

Navigating and selecting in the Setup Utility

Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To choose a menu or a menu item, use the arrow keys.
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or
To select an item, press enter.
To close a text box or return to the menu display, press esc.
To display additional navigation and selection information while the Setup Utility is open,
press f1.

Displaying system information

The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not already running, begin at step 1. If the Setup Utility is running, begin at step 2.
1.
To open the Setup Utility, turn on or restart the device, and then press
Setup Options" message is displayed in the lower left corner of the screen.
2.
Select the Main menu. System information such as the system time and date and identification
information about the device is displayed.
3.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.

Restoring default settings in the Setup Utility

The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is running, begin at step 2.
1.
To open the Setup Utility, turn on or restart the device, and then press
Setup Options" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation is displayed, press enter.
4.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the device restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
f5
or f6.
f10
while the "F10 = BIOS
f10
while the "F10 = BIOS
Using the Setup Utility
71

Advertisement

   Related Manuals for HP Mini 700

Comments to this Manuals

Symbols: 0
Latest comments: