HP un2400 Mobile Broadband Module
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
for use in the device by the governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message, remove the module to restore
device functionality, and then contact technical support through Help and Support.
Before removing the WWAN module, follow these steps:
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
Disconnect all external devices connected to the device.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
Remove the battery (see
Remove the following components:
Hard drive or solid-state drive (see
Top cover (see
Chapter 4 Removal and replacement procedures
The WWAN module and the WLAN module are not interchangeable.
Battery on page
Keyboard on page
Top cover on page
Mass storage devices on page
Spare part number