Download Print this page

HP Mini 700 Maintenance And Service Manual Page 49

Hewlett-packard netbook maintenance and service guide.
Hide thumbs

Advertisement

4.
Grasp the tabs (1) on the outer edges of the keyboard and lift the rear edge (2) until the keyboard
rests at an angle. Then slide the keyboard back until it rests on the display assembly (3).
5.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached.
6.
Disconnect the cable (2), and then remove the keyboard.
Reverse this procedure to install the keyboard.
Component replacement procedures
41

Advertisement

   Related Manuals for HP Mini 700

Comments to this Manuals

Symbols: 0
Latest comments: