3-cell, 26-Wh Li-Pol battery for the HP Mini 1000 and Compaq Mini 700
3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini 1000
(for use in all countries and regions except Germany)
3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini 1000 (for use in Germany only)
Before disassembling the device, follow these steps:
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
Disconnect all external devices connected to the device.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
Remove the battery:
Turn the device upside down on a flat surface, with the battery bay toward you.
Slide the battery release latches (1) to release the battery.
Pivot the battery (2) upward and remove the battery from the device (3).
To install the battery, insert the rear edge of the battery into the battery bay and pivot the battery
downward until it is seated. The battery release latch automatically locks the battery into place.
Spare part number
Component replacement procedures