Speakers - HP ENVY 14 Maintenance And Service Manual

Reverse this procedure to install the processor.

Speakers

Description
Speakers (include cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the hard drive (see
6. Remove the memory module/wireless module compartment cover (see
on page
7. Disconnect the battery charger board ribbon cable from the system board (see
board on page
8. Remove the top cover (see
9. Disconnect the optical drive cable from the system board (see
10. Remove the system board (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the audio/USB board.
2. Remove the four Phillips PM2.0×2.82 screws (2) that secure the speakers to the base enclosure.
Mass storage device on page
41).
47).
Top cover on page
System board on page
Battery on page 36).
38).
49).
Optical drive on page
62).
Component replacement procedures
Spare part number
657531-001
WLAN module
Battery connector
58).
69