If it is necessary to replace the display bezel or the display assembly internal components, remove
5.
the following:
(1) Four rubber screw covers on the display bezel top edge
(2) Two Mylar screw covers on the display bezel bottom edge corners
(3) Two rubber screw covers on the display bezel bottom edge
(4) Eight Phillips PM2.5×8.0 screws that secure the display bezel to the display assembly
NOTE:
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
6.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3). The following display bezels are available:
7.
For use only with HP G7000 computer models equipped with camera module and microphone,
●
spare part number 461868-001
For use only with HP G7000 computer models equipped with microphone, spare part number
●
461871-001
For use only with Compaq Presario F700 computer models equipped with camera module and
●
microphone, spare part number 461863-001
For use only with Compaq Presario F700 computer models equipped with microphone, spare
●
part number 461866-001
58
Chapter 4 Removal and replacement procedures
See
Camera module on page 38
for camera module removal information.