Hard Drive - HP COMPAQ 6510B Maintenance And Service Manual

Hard drive

Description
160-GB, 5400-rpm hard drive
120-GB, 5400-rpm hard drive
80-GB, 7200-rpm hard drive
80-GB, 5400-rpm hard drive
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
3. Lift the left side of the hard drive cover (2), swing it to right, and remove the cover.
NOTE:
4. Loosen the Phillips PM2.5×13.0 hard drive retention screw (1) that secures the hard drive to the
computer.
5. Grasp the Mylar tab (2) on the hard drive and pull the hard drive (3) to the right to disconnect it
from the system board.
50 Chapter 4 Removal and replacement procedures
Battery on page
The hard drive cover is included in the Plastics Kit, spare part number 443905-001.
46).
Spare part number
443920-001
443919-001
445939-001
443918-001