Standard Memory; Memory Upgrades - HP Compaq 6730s Specifications

QuickSpecs
Memory
667 MHz or 800 MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB and 2048 MB

Standard Memory

Optional Memory
Upgrades
Up to
1024 MB
2048 MB
3072 MB
4096 MB
8192 MB

Memory Upgrades

1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB x 1024 MB)
4096 MB (2048 MB x 2)
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in
both memory slots.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard
nature of some third-party memory modules, we strongly recommend using only HP branded memory
modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory
speed. Full availability of 4 GB or more of memory requires Windows Vista Business 64-bit or Linux. With
Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration,
so that above 3 GB all memory may not be available due to system resource requirements.
HP 1 GB (DDR2 667 MHz) SODIMM
HP 2 GB (DDR2 667 MHz) SODIMM
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
HP 4 GB (DDR2 800 MHz) SODIMM
DA - 13065 Worldwide QuickSpecs — Version 9 — 11/21/2008
HP Compaq 6730s Notebook PC
Slot 1
1024 MB
1024 MB
2048 MB
2048 MB
4096 MB
Slot 2
Empty
1024 MB
1024 MB
2048 MB
4096 MB
EM994AA
EM995AA
KT292AA
KT293AA
KT294AA
Page 11