Table of Contents
Advertisement
Note
Please ensure that when the appliance is installed it
is easily accessible for the engineer in the event of
a breakdown.
All plumbing and electrical work required to install
this appliance must be carried out by competent
persons or qualified plumbers or electricians.
Electrical connection
Before plugging the appliance into the wall socket,
make sure that:
1. the mains voltage corresponds to the voltage
given in the technical specifications;
2. the meter, fuses, mains power supply and wall
socket can all take the maximum load required.
The electric cable must not be extended. If it is too
short and you do not wish to move the socket,
replace it completely with a longer cable.
Safety standards require the appliance
to be earthed.
The Manufacturer accepts no liability for
failure to observe the above safety
precautions.
9
Advertisement
Table of Contents
