Winding The Bobbin - Husqvarna Viking E10 User Manual

WINDING THE BOBBIN

Place thread and spool holder
onto spool pin (1).
- For smaller spools of thread
place spool holder with small
side next to spool (2).
- Wind thread clockwise around
bobbin winder tension discs
(3).
- Thread bobbin as illustrated
and place on spindle (4).
- Push bobbin to right (5).
- Hold thread end (6).
- Step on foot control pedal (7)
to wind the bobbin.
- Cut thread (8).
- Press bobbin to left (9) and
remove.
Please Note:
When the bobbin winder spindle is in "bobbin winding" position, the machine will
not sew and the hand wheel will not turn.
To start sewing, push the bobbin winder spindle to the left (sewing position).
13