Rear Of Server - Fujitsu PRIMERGY RX100 S8 Operating Manual

6.1.2

Rear of server

ID indicator and error indicator
Figure 9: Indicators on the connector panel: ID and Error indicators
1 ID and Error indicators (blue and orange)
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView
Operations Manager and the iRMC S4 Web interface and its
status reported to the ServerView Operations Manager and the
iRMC S4.
Error indicator (orange)
– Lights up orange if a prefailure event has been detected.
– Flashes orange if an error was detected.
CSS
– Does not light up if there is no critical event.
If the event is still acute after a power cycle, the indicator is activated
after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), in the ServerView Operations Manager or via the
iRMC S4's Web interface.
RX100 S8
Operating Manual
Starting up and operation
65