Using The Cable Clamps (Hot-Plug Psu) - Fujitsu PRIMERGY RX100 S8 Operating Manual

Hardware installation
5.4.2

Using the cable clamps (hot-plug PSU)

You can secure the power cords in cable clamps to ensure that the insulated
connectors cannot be disconnected from the server accidentally.
Figure 5: Using cable clamps
Ê Pull the cable clamp up (1).
Ê Thread the power cord through the cable clamp (2).
Ê Press the cable clamp down until it engages to secure the cable (3).
Operating Manual 55
RX100 S8