Basic Operations; Turning On The Tv - HP PE4240N User Manual

Basic Operations

Turning on the TV

1 Plug the power cord (B) into an active AC power outlet. The Power/standby indicator light (2) on
the front panel flashes until the power is completely on; then the light is solid red.
The main power switch (A, see the following figure) (beneath the display panel on the back of
NOTE:
the TV) is in the On position from the factory. If the Power/standby indicator light is off after you plug
in the TV, the main power switch is off. To operate the main power switch, reach from the front of the
TV toward the back underneath the Channel buttons (8) on the left side of the front panel, and press
the button on the underside of the panel.
If you turn the main power switch off, wait at least 5 seconds before turning it on again.
2 Press the Power button on the front panel (1) or on the remote control to turn on the TV. The
Power/standby indicator light (2) flashes until the power is completely on; then the light is
solid blue.
Refer to "Identifying connectors" on page 10 for a description of the connectors (A through R) on the
back of the TV.
Turning off the TV
Press the Power button on the front panel (1) or on the remote control to turn off the TV. The
Power/standby indicator light (2) flashes until the power is completely off; then the light is solid red.
The TV is in standby.
If the TV is not used for an extended period of time, turn off the main power switch (A).
25
Using the TV