Download Print this page

Advertisement

3 Click Device Settings and then uncheck Treat digital display as HDTV. Click Apply.
4 Select Native and then click Apply (Accept even though you see a slight overscan). Click OK.
5 Select Screen Resolutions and Refresh Rates from the left-side list. The window appears.
6 Uncheck Show standard HDTV formats in the lower left corner of the window. Click Yes to remove
HDTV custom timings pop-up
7 Adjust the slider bar to select the native screen resolution of your TV/Display. Click Apply.
If you do not know your native screen resolution, repeat this step until your text is clear with minimal overscan.
Write down your native screen resolution.
8 Click OK to close the window.
9 For the best picture, set your monitor to the native resolution using Screen Resolution and Refresh Rates. See
"Desktop Video Adjustments" on page 14.
Be careful when changing settings. The HP Digital Entertainment Center Video Out requires specific
CAUTION:
configurations for certain TV/Display types and resolutions. This setup procedure is advanced.
HP Digital Entertainment Center TV/Display Setup Guide
31

Advertisement

Troubleshooting

   Also See for HP HP z558

   Related Manuals for HP HP z558

Comments to this Manuals

Symbols: 0
Latest comments: