Brother MFC-J6920DW Advanced User's Manual page 51

g
Swipe up or down, or press a or b to
display Off(1in1),
2in1(Portrait),
2in1(Landscape), 2in1(ID)
4in1(Portrait),
4in1(Landscape), 1to2,
Poster(2x1), Poster(2x2) or
Poster(3x3).
Press the option you want to set.
1
For details about 2 in 1 (ID), see 2 in 1 ID Copy
(Page Layout) on page 47.
If you chose 2in1 or Poster(2x2)
with Ledger or A3 size paper, go to
step h to choose your
Layout Format.
If you choose another setting, go to
step i.
h
Press Layout Format.
Do one of the following:
If you chose 2in1(Portrait) or
2in1(Landscape), press
Letterx2 i Ledgerx1,
Ledgerx2 i Ledgerx1,
A4x2 i A3x1, or A3x2 i A3x1.
If you chose Poster(2x2), press
Letterx1 i Ledgerx4,
Ledgerx1 i Ledgerx4,
A4x1 i A3x4, or A3x1 i A3x4.
i
Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j
If you do not want to change additional
settings, press Black Start or
Color Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step k.
k
After the machine has scanned the
page, press Yes to scan the next page.
l
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps k and l for each page of
1
, the layout.
m
After all the pages have been scanned,
press No to finish.
NOTE
•• Make sure the paper size is set to Letter,
Ledger, A4, A3, or Executive.
•• Poster copy is not available for Executive
size paper.
•• You can only make one color copy at a
time.
•• You can only make one Poster and 1 to 2
copy at a time.
•• Poster copy is not available when using
transparencies.
Making copies
7
45