Assembling The Barbecue - Electrolux EQBM120HAS User Manual

Assembling the barbecue

1. Remove packaging & remove all components from
inside of burner box. Remove cooking plates fastened
to pallet under cabinet.
2. Unfasten bolts securing unit to the pallet base and
remove unit from base.
model EQBM12AS
pallet bolt.
unscrew to release from pallet
polystyrene.
remove by lifting barbecue to release
model EQBM75AS
pallet bolt.
unscrew to release from pallet
polystyrene.
remove by lifting barbecue to release
electrolux e:volution barbecue assembling the barbecue 13
polystyrene
cooking plates.
cut strap at rear to remove
polystyrene
cooking plates.
cut strap at rear to remove
3. Fitting of roasting hood
– Unpack the roasting hood.
– Remove necessary screws to enable assembly of hood.
Some screws have been removed to facilitate assembly
and are included in bag with instruction manual.
– Due to the size of the roasting hood, it is
recommended that two people place the roasting
hood into position.
– When fitting the roasting hood assembly, take
particular care to avoid scratching of the external trim.
– Once in position, fix hood assembly to trim surround
with screws provided.
OR
Fitting of slimline lid
– Unpack the slimline lid.
– Remove necessary screws from barbecue trim
surround to enable assembly of brackets.
– Fit brackets to trim surround with screws removed
and additional screws in plastic bag. Fit additional
screws provided to trim where missing.
– Fit lid to brackets.
4. Fit small slimline lid (if required) in the same manner as
larger lid above.
bracket orientation for flat lid
continued over