Entering Text
∫
When a screen that looks like the one on the right is displayed, you can
enter characters.
(Only alphabetical characters and symbols can be entered.)
1
Press 3/4/2/1 to select text and then press [MENU/SET] to register.
•
Move the cursor to [
(lower case), [1] (numbers) and [&] (special characters).
•
To enter the same character again, rotate the zoom lever towards [Z] (T) to move the cursor.
•
The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
–
[]]:
–
[Delete]:
–
[ ]:
–
[ ]:
•
A maximum of 30 characters can be entered.
2
Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET] to end text
input.
•
Text can be scrolled if all of the entered text does not fit on the screen.
] and then press [MENU/SET] to switch text between [A] (capitals), [a]
Enter a blank
Delete a character
Move the entry position cursor to the left
Move the entry position cursor to the right
Wi-Fi
- 117 -
A
1
ABC
DEF
a
&
A
A
GHI
JKL
MNO
a
a
PQRS
TUV
WXYZ
Delete
Delete
Set
Set
Cancel
Select
Input