Clock functions table
Time of day
You can use the functions Duration
set the time for how long the
appliance should operate and when
the appliance should deactivate.
This lets you activate the appliance
with a delay in time. First set the
Setting the clock functions
function and temperature of cooking. This is not
necessary for the Minute Minder
again and again until the indicator
for the necessary clock function starts to
to set the time for the
necessary clock function.
The clock function operates. The display shows
the indicator for the clock function you set.
Oven - Hints and tips
Refer to Safety chapters.
The temperature and baking times in
the tables are guidelines only. They
depend on the recipes and the
quality and quantity of the
The top oven is the smaller of the two ovens. It
has 3 shelf positions. Use it to cook smaller
quantities of food. It gives especially good
To set, change or check the time of day.
To set countdown time. This function has no effect on the operation of
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
at the same time to
and then the End
, set an oven
For the Minute Minder function the
display shows the time left.
3. When the time ends the indicator of the
clock function flashes and an acoustic
signal sounds. Press a button to stop the
4. Turn the knob for the oven functions and
the knob for the temperature to the off
With the Duration
functions, the appliance deactivates
automatically. The functions work
only for the main oven.
Cancelling the clock functions
1. Press the
necessary function indicator flashes.
2. Press and hold
The clock function goes out after some
results when used to cook fruitcakes, sweets
and savoury flants or quiche.
The main oven is particularly suitable for
cooking larger quantities of food.
• Your oven can bake or roast differently to the
appliance you had before. Adapt your usual
settings (temperature, cooking times) and
shelf positions to the values in the tables.
again and again until the