Oven - Care And Cleaning - Electrolux EKC607601 User Manual

Hide thumbs Also See for EKC607601:
Table of Contents

Advertisement

Type of food
Shelf
Cream, 2 x 2dl
Cake, 1400g

OVEN - CARE AND CLEANING

Warning! Refer to the Safety chapters.
• Clean the front of the appliance with a
soft cloth with warm water and cleaning
agent.
• To clean metal surfaces use a usual
cleaning agent
• Clean the oven interior after each use.
Thus you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can destroy nonstick coating!
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abra-
sive materials as they can damage the
oven surface. Clean the oven control
panel with the same precautions
CATALYTIC WALLS (SELECTED
MODELS ONLY)
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process
heat the oven without any food
regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C and
let oven operate for 1 hour.
• Clean the oven cavity with a soft and
damp sponge.
Time in mi-
nutes
2
80-100
2
60
Final defrost-
ing mins
Cream can be whipped even if it is
10-15
60
Warning! Do not attempt to clean
catalytic surface with oven sprays,
abrasive cleaners, soap or other
cleaning agents. This will damage the
catalytic surface.
Discolouration of the catalytic surface
has no effect on catalytic properties.
SHELF SUPPORT RAILS
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away
from the side wall and remove it.
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
electrolux 23
Comments
still slightly frozen.
-
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents