DFI G486VPB User Manual page 34

PCI/ISA System Board
To install an upgrade CPU in the G486VPB, follow the
steps below.
1. Make sure the handle on the side of the ZIF socket
is up. To raise the handle, pull it out to the side a
little and raise it as far as it will go. The top plate
will slide back. Do not use screwdrivers or other
tools to open the socket, or damage may occur to the
system or socket. It may be necessary to initially
apply a small amount of sideways force to free the
handle from its retaining "tab." Once clear of the
"tab," the lever will open easily.
2. Once the lever is completely up, remove the old
CPU by carefully lifting it straight out of the socket.
You are now ready to insert the new CPU.
34
Lifting the Handle