Monitor Messages - Compaq TFT1701 User Manual

Operating the Monitor
Menu
Auto Adjustment

Monitor Messages

Special messages will appear on the monitor screen to identify
the following monitor conditions:
I
Video mode not supported - If there is something wrong with
the input signal, a message appears on the screen or the
screen goes blank although the power indicator light is still
on. This message indicates the monitor is out of scan range or
that you need to check the signal cable.
I
No Connection, check signal cable - Indicates the video cable
may not be plugged into the computer or the computer may
not be turned on.
4–12
Function
Allows the monitor to self-adjust to the
incoming video signal. The values of fine,
coarse and position are adjusted
automatically.
User's Guide