Connecting The Speakers - HP PAVILION MX75 User Manual

4 Insert the pink microphone cable plug into the
sound input connector on the back of your PC.
If you have an HP Pavilion, the connector is
marked in pink. However, on some
HP Pavilions, the connection could be marked
in yellow.

Connecting the Speakers

The monitor is designed for use with the Polk
Audio speakers supplied by HP.
1 Extend the cables attached to the two
speakers.
2 Identify the left and right speakers. You can
tell which side of the monitor a speaker fits
onto by observing its curvature and mounting
pegs. Not all speakers have mounting pegs. If
you don't have mounting pegs, skip to step 5.
The side of the speaker with mounting pegs
fits flush against the side of the monitor.
3 Insert the pegs of the right speaker into the
corresponding slots on the right side of the
monitor. Push down, sliding the speaker pegs
completely into the slots.
4 Insert the pegs of the left speaker into the
corresponding slots on the left side of the
monitor. Push down, sliding the speaker pegs
completely into the slots.
5 Refer to your PC user's guide for instructions
on how to connect your speakers to the PC.
HP Pavilion MX75 Monitor Guide
5