5.6
RS-422 CONNECTORS
The four connectors labeled "CAM1", "CAM2", "CAM3", and "CAM4" on the connector plate are six
position, four conductor modular jacks. This connector provides RS-422 level differential signals to and
from the digital pan and tilt head. The RS-422 is the interface from the controller to the pan and tilt heads.
Shown below is the pin-out for the RS-422 connector. The pin assignment for this connector follows:
The camera connector pin assignment:
Pin #
2
P/T Data Out - (Data In to the DV-180 Controller)
3
P/T Data Out +
4
P/T Data In - (Data Out of the DV-180 Controller)
5
P/T Data In +
JVC DV-180 PAN/TILT Operations Manual
Pin 1
Pin 6
Pin 2
Pin 5
Not
Not
Used
Used
Description
13
Doc #: D0154-A