Lenovo G40-30 Hardware Maintenance Manual page 65

Lenovo G40-30/G40-45/G40-70/G40-70m/Z40-70/Z40-75
Figure 15. Removal steps of LCD front bezel, LCD panel, and hinges
(continued)
Remove the screws 2.
Step Screw (quantity)
M2 × 3.5 mm, flat-head, nylok-coated (4)
2
LCD Module to Hinge & A
Lift the LCD panel slightly 3. Peel off the adhesive tape and detach the
connector in the direction shown by arrow 4. Then remove the LCD panel.
4
When installing: Make sure that the metal connector is attached firmly.
Color Torque
Black 1.5 ~ 2.0 kgf*cm
3
61