Table of Contents
Advertisement
Table B-1
Specifications (continued)
Altitude:
Operating
Storage
Power Consumption (maximum)
Input Terminal
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory defaults.
This monitor automatically recognizes these preset modes and they will appear properly sized and
centered on the screen.
CQ1859, CQ1859e, and CQ1859s Models
Table B-2
Factory Preset Modes
Preset
1
2
3
4
5
6
7
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●
You are not using a standard graphics adapter.
●
You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are 10 user modes that can be entered and stored.
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor uses less than 28 watts.
The monitor also supports a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize
24
Appendix B Technical Specifications
Pixel Format
Horz Freq (kHz)
640 × 480
31.469
720 × 400
31.469
800 × 600
37.879
1024 × 768
48.363
1280 × 960
60.00
1280 × 1024
63.98
1366 × 768
47.712
0 to 3657.6 m
0 to 12192 m
30 watts
One VGA connector with cable included
Vert Freq (Hz)
59.940
70.087
60.317
60.004
60.00
60.02
59.79
0 to 12,000 feet
0 to 40,000 feet
ENWW
Hide quick links:
Advertisement
Table of Contents
