HP MSL6000 Series User Manual page 122

Table 10 Fault Symptom Codes (continued)
FSC Message
3108 Picker Jammed 8
(The picker jammed during a
pass-through fetch operation.)
3109 Picker Jammed 9
310A Picker Jammed 10
310B Picker Jammed 11
(The picker jammed during a drive fetch
operation.)
310F Picker Jammed on Stow
(The picker jammed on a stow operation.)
122 Troubleshooting
ERP
Press the Enter button to reboot.
•
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).
• Check pass-through alignment.
• Press Enter to reboot.
• Make sure cartridges are fully inserted
into magazines.
• Press Enter to reboot.
• Make sure cartridges are fully inserted
into magazines.
Press the Enter button to reboot.
•
• Ensure the drive shows good status
through the drive status window.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).
Press the Enter button to reboot.
•
• Ensure the drive shows good status
through the drive status window.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
• Ensure cartridges are fully inserted in the
magazine(s).