Table of Contents
Advertisement
Initial Switch-on: Software will be Installed
If the PC is connected to a network, the network protocol is required as well as the user and
server details. Contact your network administrator if you have any questions about these
settings.
When you switch on your PC for the first time, the supplied software is installed and configured.
You should plan some time for this, as this process must not be interrupted.
CAUTION
Once the installation has been started the PC must not be switched off!
During installation the PC may only be rebooted when you are requested to do so!
Otherwise the installation will be not be performed correctly. If a fault occurs during the installation,
the contents of the hard disk must be completely restored.
Switching on monitor and PC
Switch the monitor on.
Switch the PC on. To do this, follow the instructions below.
1
Switch the PC on with the main power switch on the back panel.
Main switch
2
Press the ON/OFF switch on the front of the PC.
D5200_1(01-10)
Power button
7
12/7/06, 10:59 am
7
Advertisement
Table of Contents
