Operation With The Remote Control Unit; Operation - Sanyo KS1872 Technical & Service Manual

1. Operation

12
Operation with the Remote Control
Unit
STEP 4
STEP 5
Check that the circuit breaker on the power panel is turned on.
NOTE
Press the setting buttons as described below and change the settings as desired.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
To stop the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 3
STEP 1
Press the MODE selector button and select the desired mode.
For dehumidifying operation
For cooling operation
For fan only operation
To start the air conditioner, press the ON/OFF operation button.
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
30 °C max.
16 °C min.
Set the FAN SPEED selector button to the setting you want.
Press the FLAP button and set the airflow direction as desired.
(Refer to "Adjusting the Airflow Direction" on page 20.)
→
→
→
or 86 °F max.
60 °F min.
OI-800-12-EG