Top cover
NOTE:
The top cover spare part kit includes TouchPad and TouchPad buttons, and speaker assembly.
Description
For use only with computer models equipped with a fingerprint reader, Onyx
For use only with computer models not equipped with a fingerprint reader, Onyx
For use only with computer models equipped with a fingerprint reader, Moonlight White
For use only with computer models not equipped with a fingerprint reader, Moonlight White
For use only with computer models equipped with a fingerprint reader, Espresso Black
For use only with computer models not equipped with a fingerprint reader, Espresso Black
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Switch cover and keyboard (see
d.
Display assembly (see
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the 9 Phillips PM2.5×6.5 screws (1) that secure the top cover to the computer.
Battery on page
54).
Hard drive on page
63)
Optical drive on page
Switch cover and keyboard on page
Display assembly on page
57)
75)
Component replacement procedures
Spare part number
512828-001
511888-001
518108-001
518109-001
518788-001
518789-001
70)
85