Advertisement
6
iCAM4000 Configuration
Changing the IP Address of the iCAM
* Note: The IP Address of each iCAM must be changed individually. Do not connect more than one
un-configured iCAM to the network at any one time to avoid IP Address conflicts.
Any computer with a web browser which supports graphics (ex. Internet Explorer) can be
used to configure the iCAM4000/4100.
1. Set the computer to the static IP of 192.168.5.1 - subnet 255.255.255.0
2. Open the web browser and enter http://192.168.5.100 in the address bar then press ENTER. The iCAM login
screen will appear.
3. Enter the default Username: iCAM4000 and Password: iris4000 (both are case sensitive)
4. The iCAM Configuration Main Menu will appear.
Advertisement
