Physical Characteristics; Power Management Modes - Dell E178WFP User Manual

Flat panel monitor
Hide thumbs Also See for E178WFP:
Table of Contents

Advertisement

Electrical
The following table lists the electrical specification:
Video input signals
Synchronization input signals
AC input voltage / frequency / current
Inrush current

Physical Characteristics

The following table lists the physical characteristics:
Signal cable type
Dimensions (with stand):
Height
Width
Depth
Weight:
Monitor (Stand and Head)
Monitor Flat panel only (VESA Mode)
Weight with packaging
Environmental
The following table lists the environmental limitation:
Temperature:
Operating
Nonoperating
Humidity:
Operating
Nonoperating
Altitude:
Operating
Nonoperating
Thermal dissipation

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically resumes
Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance 
D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
100 to 240 VAC / 50-60 Hz / 1.5 A Max.
120V: 30A (Max.)
240V: 60A (Max.)
D-sub: Detachable, Analog, 15pin, blue connector, attached to the
monitor
339.0 mm (13.34 inches)
403.9 mm (15.90 inches)
136.5 mm (5.37 inches)
3.60 kg (7.93 lb)
2.70 kg (5.95 lb)
4.85 kg (10.68 lb )
 
5° to 35 °C (41° to 95 °F)
Storage: 0° to 60 °C (32° to 140 °F)
Shipping: -20° to 60 °C (-4° to 140 °F)
10% to 80% (noncondensing)
5% to 90% (noncondensing)
3,657.6 m (12,000 ft) max
12,192 m ( 40,000 ft ) max
256.08 BTU/hour (maximum)
119.5 BTU/hour (typical)

Advertisement

Table of Contents
loading

Table of Contents