Le1911I Model; Entering User Modes; Energy Saver Feature - HP LE1911I User Manual

Table B-5 Factory Preset Modes (continued)
10
11
12
13
14
15

LE1911i Model

Table B-6 Factory Preset Modes
Preset
1
2
3
4
5
6

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:
● You are not using a standard graphics adapter.
● You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display or HP Display Assistant software. Your changes can be made to any or all of these modes and
saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just
as it does a preset mode. In addition to the 15 factory present modes, there are four user modes that
can be entered and stored.

Energy Saver Feature

When the monitor is in its normal operating mode, the monitor uses less than 25 watts (LE1901wi) or
40 watts (L1910i) or 28 watts (LE1911i) of power and the Power light is green.
The monitor also supports a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize
less than 1 watt of power. There is a brief warm up period before the monitor will return to its normal
operating mode.
ENWW
1024 × 768 56.5
1024 × 768 60.0
1152 × 870 68.7
1152 × 900 71.7
1280 × 1024 64.0
1280 × 1024 80.0
Pixel Format Horz Freq (kHz)
640 × 480 31.469
720 × 400 31.469
800 × 600 37.879
1024 × 768 48.363
1280 × 960 60.00
1280 × 1024 63.98
70.0
75.0
75.0
76.0
60.0
75.0
Vert Freq (Hz)
59.940
70.087
60.317
60.004
60.00
60.02
Entering User Modes 39