This unit can be operated in the system environment explained here.
CPU: Pentium III 1.0GHz (Recommanded system requirements for optimal
performance, CPU: Pentium IV 2.4GHz or faster, Memory: 512MB or greater)
VGA Card Memory
128MB or greater.
20GB or more free space.
(The free space needed for writing depends on the quantity of data.)
Enhanced-IDE interface (as Primary Slave, Secondary Master or Slave)
5.25-inch half-height bay required
+5V/+12V power socket required
Software Required OS
Windows ME(Not supported in LightScribe).
Windows 2000 Professional/ XP(Home Edition/ Professional),
Direct X 9.0 or Higher is required.
CD-R, CD-RW, DVD-R,
CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That's, TDK, Ritek or HP
discs are recommended.
DVD+RW, DVD±R DL,
CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are recommended.
DVD-R : Mitsubishi Kagaku Media, Maxell, That's are recommended.
DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended.
DVD+R : Mitsubishi Kagaku Media, That's, Maxell are recommended.
DVD+RW : TDK, FujiFilm, Ricoh are recommended.
DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended.
DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended.
* Compatibility problem in write/read function may occur with media depending on the media
* For DVD±R 18x support media: Mitsubishi Kagaku Media, That's, Maxell (MID: MAXELL 003, MXL
RG04) are recommended.
* For Optimal 18x writing, 80 pin E-IDE cable and Pentium IV 2.4GHz or faster are
* Upon the media condition or some of user's enviroment the maximum speed sometimes could not