Table of Contents
Advertisement
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Installation
Warning! Refer to the Safety chapters.
Technical data
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
Minimum distances
16
893 - 912 mm
600 mm
600 mm
37 l
74 l
B
A
A
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
.........................................
.........................................
.........................................
Dimension
A
B
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
The anti-tilt protection
Caution! You must install the anti-tilt
protection (A+B). If you do not install it the
appliance can tilt.
Before you install anti-tilt protection, adjust the
appliance to the correct height.
The anti-tilt protection has two parts (A+B).
You can find the anti-tilt protection (B) on right
or left side of the rear wall of the appliance
(See fig. 1). You must install the anti-tilt protec-
tion (A) on the wall. The distance of the hole of
the anti-tilt protection (A) from the floor is about
816 mm. Make sure you install the anti-tilt pro-
tection (A) at the correct height. Screw it into
the solid material or use applicable reinforce-
ment.
mm
2
685
www.zanussi.com
Advertisement
Table of Contents
