[Example 1] Turning ON the power. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC
'30' '30' '21' '0D'
00!
[Example 2] Selecting VIDEO as the input signal during auto positioning (Values enclosed in quotation marks are
ASCII codes.):
Command sent from the PC
'30' '30' '5F' '76' '31'
00_v1
The flowchart on the next page shows the recommended operating sequence for your reference to create a
program.
Status code returned
from the projector
'30' '30' '21' '0D'
00!
Status code returned
from the projector
'30' '30' '5F' '76' '31' '3A' '4E'
00_v1:N
3
Description
Command for POWER ON
Command receipt confirmation
(Command echo back)
Description
(During auto positioning)
Command for selecting VIDEO as the
input signal is sent out.
The command is received by the
projector but cannot be executed.
(NAK return)