To transmit
an aplet
Extending aplets
1. Connect the PC or aplet disk drive to the calculator by
cable
or
align the two calculators' infrared ports by matching
up the triangle marks on the rims of the calculators.
Place the calculators no more than 4 inches (10 cm)
apart.
2. Sending calculator: Open the Library, highlight the
aplet to send, and press
–
The
SEND TO
options:
HP39G (IRDA)
HP39/40 (USB)
HP39/40 (SER)
USB DISK DRIVE
port
SER. DISK DRIVE
RS232 serial port
Note: choose a disk drive option if you are using
the hp39gs connectivity kit to transfer the aplet.
Highlight your selection and press
–
If transmitting to a disk drive, you have the
options of sending to the current (default)
directory or to another directory.
3. Receiving calculator: Open the aplet library and
press
.
–
The
RECEIVE FROM
options:
HP39G (IRDA)
= to receive via low-speed infrared
HP39G
HP39/40 (USB)
HP39/40 (SER)
USB DISK DRIVE
USB port
SER. DISK DRIVE
RS232 serial port
.
menu appears with the following
= to send via high-speed infrared
= to send via the USB port
= to send via the RS232 serial port
= to send to a disk drive via the USB
= to send to a disk drive via the
menu appears with the following
= to receive via high-speed infrared
= to receive via the USB port
= to receive via the RS232 serial port
= to receive from a disk drive via the
= to receive from a disk drive via the
.
19-5