Charging the Battery
New batteries are partially charged. Before you can use your
handset, install and charge the battery, as follows.
Note: Some batteries perform best after several full charge/
discharge cycles.
Do This
1 Plug the travel
charger into your
handset with the
release tab up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your handset indicates
the release tab and remove the travel charger.
Note: When you charge the battery, the battery level indicator in
the upper right corner of the display shows the status of the
charging process.
Battery Use
Battery performance depends on many factors, including 3's
network configuration; signal strength; the temperature at which
you operate your handset; the features and/or settings you select
and use; and your voice, data, and other application usage
patterns.
Battery Care
Caution: To prevent injuries or burns, do not allow metal objects to
contact or short-circuit the battery terminals.
, press
Charge Complete
Getting Started - 19