Motorola Mobile Phone User Manual page 125

Attaching a Serial Cable
Use the interchangeable head on the Motorola Multi-Connect Serial
Cable to connect a computer, Palm III device, or Palm V device to
your handset.
Do This
1 Plug the serial cable into the detachable head. Make
sure that the Motorola logo on the detachable head
and the metal shielding on the serial cable plug are
both facing you.
2 With the Motorola
logo and the handset
both facing you, plug
the detachable head
into your handset's
accessory connector
port.
3 Plug the other end of the cable into the serial
interface connection on the external device and
tighten the screws.
Note: To save handset power when using a serial cable, plug a
charger into the charger slot on the cable head.
Getting More Out of Your Handset - 125