HP xw4300 Quickspecs page 60

QuickSpecs
Technical Specifications - Optical Devices
LightScribe Direct Disc
Labeling Parameters
Access Times
(typical reads, including
settling)
Power
Audio Output
Operating Conditions
(all conditions non-
condensing)
Certifications,
Approvals
Operating Systems
Supported
DA - 12260 Worldwide — Version 22 — May 25, 2007
Media Supported
Resolution
Labeling Times
Random DVD
Random CD
Full Stroke DVD
Full Stroke CD
Startup Time (single)
Startup Time (multi-
session)
Stop Time (typical)
Cache Buffer
Data Transfer Modes
Source
DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
DC Current
Total Drive Power
(standby mode)
Line-Out
Signal-to-Noise Ratio
Channel Separation
Temperature
Relative humidity
Maximum wet bulb
temperature
MMC-4 compliant, multi-read compliant, Microsoft WHQL certification,
ACA AS/NZS 3548 class B, BSMI CNS 13438, CE Mark, C.I.S.P.R. Pub
22, TUV or VDE EN60950, EN 55022, EN55024, EMKO EN60950, EN
60825-1, UL 60950, CSA C22.2 60950-2000, CFR 21 part 1040 class 1,
CFR 47 C.I.S.P.R. Pub 22 Class B, DHHS/FDA, ANSI C63.4-1992
(FCC Class B), relevant parts of IEC 61000-4.
Microsoft Windows XP Professional,
Microsoft Windows XP Professional x64 Edition
Red Hat Linux 7.3 WS3 and WS4 Versions (LightScribe labeling
functionality not supported on Linux)
HP xw4300 Workstation
CD-R: LightScribe Version 1.0
DVD+R: LightScribe Version 1.0
Dots per inch: 600
Tracks per inch: 500-1600 (mode
dependent)
Draft quality: < 20 min
Normal quality: < 28 min
Best quality: < 36 min
< 130 ms (typical)
< 120 ms (typical)
< 240 ms
< 200 ms
< 7 seconds (typical)
< 30 seconds (typical)
< 4 s
2 MB
ATA PIO mode 4 (16.7 MB/s); ATA Multi-word
DMA mode 2 (16.7 MB/s); ATA UltraDMA
Mode 3 (44.4 MB/s) (default on most HP xw
series workstations)
Four-pin, DC power receptacle
12 VDC ± 5%-200 mV ripple p-p
5 VDC (< 1000 mA typical, < 1600 mA
maximum)
12 VDC (< 600 mA typical, < 1400 mA
maximum)
< 2.5 Watt
0.7 VRMS
74 dB
65 dB
41° to 122° F (5° to 50° C)
10% to 90%
86° F (30° C)
Page 60