NEC M362W User Manual page 113

Selecting Signal Format [COLOR SYSTEM]
This feature allows you to select video standards manually.
Normally select [AUTO]. Select the video standard from the pulldown menu.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 768)/WUXGA (1920 × 1080) signals in recognizing an input sig-
nal.
When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be recognized on
M402X/M362X/M322X/M282X/M332XS. In this case, select [OFF].
NOTE:
• The [OFF] is selected at the time of shipment of M402X/M362X/M322X/M282X/M332XS.
• The [ON] is selected at the time of shipment of M402W/M362W/M322W/M352WS/M302WS.
Setting HDMI1/2 [HDMI SETTINGS]
Make the settings for each video level when connecting HDMI equipment such as a DVD player.
VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image
contrast and increase detail in the dark areas�
NOTE:
• If the projector does not reflect the settings for your HDMI equipment such as a DVD player connected to the HDMI 1 IN or HDMI
2 IN connector, select the HDMI1 or HDMI2 input source again on the projector.
Setting Audio [AUDIO SELECT]
Make the settings for each audio level when connecting HDMI equipment, your network, and USB-B port. Select
between each equipment and computer.
HDMI ��������������������� Select [HDMI1] or [HDMI2] to switch the HDMI 1 or HDMI 2 IN digital audio signal or select [COMPUTER]
to switch the COMPUTER input audio signal�
LAN ������������������������ Select [LAN] or [COMPUTER] to switch the source connected to the network�
USB-B �������������������� Select [USB-B] or [COMPUTER] to switch the source connected over the USB cable (USB-B)�
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are per-
formed.
- Displaying the main menu
- Switching sources
- Resetting data by using [RESET]
- Pressing POWER ON or STANDBY button
102
5. Using On-Screen Menu