Advertisement
Troubleshooting
E
N
G
L
I
S
Troubleshooting Tips
H
5
Sirius Control
Display
Your location is out of receivable areas (e.g. in a tunnel), or the unit is
decoding a selected broadcast. The display appears also while the con-
nections are being checked after the power has been turned on.
Wait until getting out of the unreceivable area or completing the de-
coding.
User's registration has not been carried out.
Complete user's registration.
A channel that is not included in the agreement was selected.
Select a channel that is included in the agreement. Refer to the op-
CALL 888-539-SIRIUS
erating instructions for Sirius receiver with regard to the agreement.
TO SUBSCRIBE.
The ID could not be acquired.
Contact your nearest Panasonic Servicenter for service.
The selected channel is invalid.
Select a channel which can be received instead.
≥ When the Sirius receiver fails to operate for some reason.
≥ When SET ON serves as the Sirius setting and the Sirius receiver has
not been connected.
Check the Sirius receiver's connections.
Note:
≥ For details, refer to the operating instructions for the Sirius receiver used.
12
Cause/Step
Electrical Connections
Example combination
≥ Sirius receiver (CR-SRT100, option)
≥ CD changer (CX-DP88U, option)
≥ Dual changer control unit
(CA-CD55,option)
Note:
≥ For wiring, carefully read the operating in-
structions for the devices connected.
R (red)
RCA cord
L (white)
(supplied with CA-CD55)
Dual changer
output cord
Dual changer
.
TWIN CD
C-CONT
control unit
Dual CD changer control lead
(CA-CD55, option)
(Brown/white Stripe)
Changer 1
connecting
cord
DIN cord
RCA cord
Extension cord
(supplied with CX-DP88U)
Battery lead
Fuse (3 A)
Ground lead
CD changer
(CX-DP88U, option)
CQ-HX1083U
CQ-HR1003U
6 Power connector
R (red)
CD changer
input cord
DIN extension cord
L (white)
(supplied with CA-CD55)
Changer 2
connecting
cord
DIN cord
RCA cord
(option)
Sirius receiver
(CR-SRT100, option)
Extension cord
(supplied with CR-SRT100)
E
N
G
L
I
S
H
6
13
Advertisement
