Honeywell CHL30XC Owner's Manual page 20

TROUBLESHOOTING GUIDE
PROBLEM
The unit does not respond
The unit does not
throw warm air
Customer Support: +44 (0)1477 539500
18
POSSIBLE CAUSE
Remote control batteries.
Damaged Control Panel
on unit.
Heating element not working
SOLUTION
Check batteries. Replace if
needed. Try to operate using
the control panel.
Try with remote control. If the
unit responds, PCB board
fasteners may be loose.
Contact service centre. - If
neither remote control nor
control panel works, PCB
board may be damaged.
Contact service centre.
Check if the HEAT function
is ON. Press the HEAT button
and check the contol panel
indicator.If the contol panel
does not show the LED icon
for heat, possibly the PCB or
heater element may be
damaged.
Contact service center.