Function Buttons - Honeywell CHL30XC Owner's Manual

USE & OPERATION

FUNCTION BUTTONS

POWER SWITCH
This unit is equipped with a spearate Main Power Switch,
located on the side near the top (part no.19). Please make
sure that this Power Switch is in the ON position, if your
Power Switch is not in the ON position the unit will not run.
POWER
Press the POWER button to turn the unit on. To turn the unit
off, press the button again. The cooler will start automatically
at medium speed. After a few seconds the speed will switch
to low.
SPEED
Press the SPEED button repeatedly and the speed will change.
SPEED
The indicator light will show the selected speed.
COOL
High Medium Low
COOL
To begin cooling the desired area press the COOL button.
The indicator light will come on and the water pump will
operate. You will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
10