Siemens 108 User Manual page 64

Configuring the Advanced Settings
Selecting from the list of logged-in PCs
ì
From the Known wireless clients list (all PCs that currently have access to the
Gigaset WLAN Repeater 108), select the PC you want to add to the access control.
ì
Click on the Add button to add the entry to the list.
ì
Apply the settings by clicking OK.
Please note:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset WLAN Repeater 108. Otherwise you will no longer be
able to access the user interface and a corresponding error message will be
shown.
If, by mistake, you have denied all PCs access to the Gigaset WLAN Repeater 108
you have two choices:
u
You can completely reset the Gigaset WLAN Repeater 108 (see page 13).
u
You can connect a PC to the Gigaset WLAN Repeater 108 using one of the LAN
connections. As MAC access control only applies to PCs that are connected
wirelessly, you can use this PC to change the configuration.
64