Configuring the Advanced Settings
Operating Mode
You can operate the Gigaset WLAN Repeater 108 in the following operating modes:
u
Repeater
u
Access point
u
Ethernet adapter
In the factory setting, the Gigaset WLAN Repeater 108 is configured as a repeater. You
can find more information about the operating modes in the section on "Possible uses"
on page 7.
ì
On the Advanced Settings page, select Operating Mode.
ì
From the selection menu, choose the Operating Mode you want to use.
ì
Click on OK.
You are now prompted to confirm the restarting of the device. Restarting can take up to
two minutes.
48