Canon Selphy CP910 User Manual page 51

• Printing in progress cannot be canceled from SELPHY by using the
<v> button. To cancel printing, use the computer to delete the print
job.
• The printer may not work correctly if it is connected to a computer
via a USB hub.
•
The printer may not work correctly if USB devices other than a
USB mouse or keyboard are used at the same time. In this case,
disconnect the other USB devices and reconnect the printer.
•
Avoid allowing your computer to enter sleep or standby mode while
the printer is connected via USB. If the computer enters standby
mode with the printer connected via USB, wake the computer
without disconnecting the USB cable. If recovery fails, restart the
computer.
• For computer or photo software instructions, refer to the relevant
user manual.
• If an error message is displayed on SELPHY, also check for any error
messages displayed on the computer (in desktop mode). Messages will be
automatically dismissed once you resolve the issue indicated.
• If a message is displayed on the computer, you can also click [Cancel] to
cancel printing.
• Macintosh: If [Canon CP910] is not available as a destination printer, register
the printer on the computer as follows.
Access [System Preferences] ► [Print & Scan] (or [Print & Fax]).
Click [+] below the list.
Choose [Canon CP910].
Click [Add].
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via Wi-Fi
Printing via USB
Cable
Troubleshooting
Appendix
51